PALLAPAY EXCHANGE

A blank, black screen and blinking cursor. Lines and lines of scrolling text and someone in front of that screen who seemingly understands an incomprehensible flow of information. That is the shell.

The shell has many other names: the terminal, the command prompt, bash…​ PowerShell, if you’re looking at Windows and feeling blue. Each name has its own nuances. But that doesn’t matter right now. What matters is that there is the interface to computing devices that nearly all people use, and then there is the shell.

If you’ve come here to get a shell and don’t care for much else, then you should skip to the gate.io section. Be warned that the shell is more powerful than the usual way of interacting with a device. Deleting files is permanent in the shell, any file can be accessed at any moment in the shell, and hopefully it’s not farfetched to assert that those two things are a dangerous combination.

Using a computer or smart device happens in 1 of 2 ways:

Thankfully, there are TLA’s (Three Letter Acronyms) for both methods described above:

These acronyms are pretty good as far as acronyms go. We will refer to the shell by many names, perhaps sometimes even by the CLI initialism. The GUI doesn’t have as nice of a name as the shell, so we will probably use GUI to briefly refer to the interface that everyone knows about on computing devices that is driven by a pointer on a screen.

Below is a screenshot of a shell after successful login and before the user has typed in any commands:

In the picture above, there is a lot of empty space, and even the line of text that exists, does not provide a lot of clarity. The situation is simpler than how it looks. There are only 3 pieces of information in the screenshot above, and you would likely recognize at least one of them if it were you who logged on:

From left to right in the shell command line prompt:

In terms of raw power, Q0h313th could delete every file they own on this machine with one command. That’s almost never desirable, and I will wait to show this command until there is something useful and desirable to do with it. In terms of useful power, Q0h313th could create a copy of an entire website for use when there is no accessible WiFi. That’s using the command wget.

Now let’s talk about getting a shell!

Cybersecurity is a topic that is most deeply learned by listening and doing. For this reason, I advise you to create a picoCTF account at this point if you have not already. Beyond providing 120+ security challenges in helpful learning ramps, every picoCTF account gets access to a web-based Linux shell.

A note on the structure of my (LT’s) chapters: many times I will provide a high level tutorial for a task and also a step by step walkthrough for the same task. This is my attempt at accommodating different learning styles and, different levels of experience. Typically, the high-level walkthrough is more for learners who already know the basics but need a refresher or need a reminder about the particulars when it comes to this Primer. The step by step walkthrough is more for learners who have never ventured in a particular task before. Of course, you must choose your own path here, but the safest bet may be to read the high-level walkthrough but actually put hands to keyboard for the step by step walkthrough.

Our first language as children, whether Spanish, English or anything else primarily for communication with other humans, likely took little conscious effort on our part. For anyone who has learned a second language, it was quite the opposite: very little - if anything - came naturally. Learning Shell for someone who has only "spoken" GUI is like learning a second language. This is good news and bad news. The good news is that Shell and GUI are languages for something you’ve been using for probably years, but the bad news is there is a whole new vocabulary with only a handful of cognates (words that sound and mean the same in both languages) here and there.

The basic computer operations that everyone is familiar with in GUI’s can easily be done in the shell as well. Here’s some of the most common operations for anyone using a computing device:

As the table above shows, using a GUI involves browsing and clicking, while using a shell involves knowing a good app to use. Google has made finding the right app for a shell interface much easier than it was years ago. As always for CTF’s, Google is your friend! However, more direct resources can be even more helpful, such as this website below that quickly explains shell commands:

https://explainshell.com/explain?cmd=date

However, things do not always go as planned. The next section deals with those sorts of situations that inevitably arise.

The main severity in the learning curve with the shell is that you must know the apps and commands available to you either by memorization or by looking them up when you need them. Certainly, it is faster to memorize as many as possible.

The other challenge is the amount of typing that sometimes must be done to reference the intended file.

Lastly, interfacing with apps also requires memorizing or looking up names of parameters or arguments.

To summarize, some of the most challenging aspects of using the shell:

You may have noticed that we did not cover overcoming challenge 3. If you are curious, look up the man command explained in this cheat sheet:

https://www.git-tower.com/blog/command-line-cheat-sheet/

Using Google helps with learning commands to help solve problems in the shell, and also the "Explain Shell" website I linked to earlier in this chapter.

In general, computer science professionals refer to "Digital Forensics" as "Forensics", for simplicity’s sake. Digital Forensics is the field in cybersecurity that tries to gather and understand evidence after an incident, which can be crime, to determine how it happened. This not only helps law enforcement when pledging someone innocent or guilty, but also to understand how to improve security in a system that was successfully attacked. Digital Forensics focuses on gathering evidence present in computer devices that hold information electronically. It is a branch of Forensic Science, which can also investigate any type of crime even if there is not computer media involved.

We will begin by learning how to search for information in a file system. Go to the picoCTF webshell at:

https://webshell.picoctf.org/

Once you are connected, open up this problem in a separate tab:

https://play.picoctf.org/practice/challenge/85

Download the problem file in your webshell by right-clicking the link in the problem description and selecting Copy Address or Copy Link. Then download it by typing in `wget ` and pasting the address after 'wget', space. Your command should look something like this, but is likely to not be exactly the same:

You need to copy and paste your own link for the file.

Great! So now you should have the challenge file saved on your webshell as file. Now what?

As a reflex, you should always use the program file on new files that CTF challenges give you. The next command is kind of confusing, because the first word references the program file and the second word references the file named file, but run this command and see what it tells you:

If done properly, it should tell you:

This tells us the file is plain text, but has unusually long lines. Since it is plain text, we can use cat to see what it contains.

Running this command will show that the file is mostly made up of gibberish. If this were a cryptography challenge, decoding the gibberish might be what needs to happen, but this is a 100 point general skills question, so I doubt that’s what needs to happen here. What is the challenge author pushing us towards? There’s only one hint and it is a grep tutorial. What is grep?

Grep is a Linux utility, so we can learn about it by bringing up its man page:

The first line of the man page says:

This is perfect! We want to search through gibberish to find the flag. But how do we specify the pattern to search for and the file to search in? For this, I recommend the grep tutorial in the hint, not the man page. (Man pages tend to be highly technical and can be confusing to novices)

One of the first examples in the grep tutorial uses the following command:

'mellon' is what is being searched for and it is being searched for in 'mysampledata.txt' What if we searched for 'picoCTF' in 'file'? That command would look like:

This should get the flag for you and print it on your screen.

Let’s consider another challenge:

https://play.picoctf.org/practice/challenge/320

Download the zip file into your webshell like you did for the previous challenge. As before, use file on it right away to have an idea of what you’re dealing with:

You should see the following output:

To see more of this challenge, all we have to do is unzip the archive:

You’ll see a lot of output, but you can ignore that for now. List the contents of your current directory to see the new directory called 'files'. Try exploring that a bit with cd and ls, remember that you’re looking for a file called 'uber-secret.txt'.

It may be hard to find 'uber-secret.txt' without the help of a tool. This problem is called 'First Find' and our last problem was called 'First Grep'. Is there a tool called 'find' in Linux? See if there is a manpage:

There is! The first line reads:

This sounds perfect. Exit the manual by pressing 'q'. As mentioned before, manpages are quite technical and can be overwhelming to try and read when you are first starting out. Let’s find some simpler examples by Googling. My Google query was find file linux command. I felt the need to specify linux command because find is such a generic word. My top Google result was this:

https://www.plesk.com/blog/various/find-files-in-linux-via-command-line/

I especially liked this result because I know plesk is not a commercialized site. Scroll down to the first example under Basic Examples.

This command means: starting in the current directory (which is what ., dot means), look in this directory and all subdirectories for the file named 'thisfile.txt'. We can slightly modify this example to fit our needs for the challenge.

Make sure you are in the 'files' directory for this command. If you unzipped the archive in your home directory, you can use the following command to get back to the 'files' directory:

Once you’re in the files directory, use this command:

If you were in the 'files' directory when you ran this command, you should get the following output:

This is the path to the file that was found. We’re going to get into the same directory as this file by following the directories listed in this file path. We know that '.' is our current directory, so our first cd is to 'adequate_books'. Remember to use the Tab key to autocomplete unambiguous file and directory names. To explain what I mean by 'unambiguous' here’s a relevant example of an ambiguous file name in our current context:

If you press the Tab key after only typing 'a' it won’t autocomplete because there are two directories that start with 'a', 'acceptable_books' and 'adequate_books'. The shell doesn’t know which one you want. To get Tab to autocomplete type the following unambiguous directory name and then strike tab:

When you press tab, it becomes:

One last note on tab completion. When there is an ambiguous file name that doesn’t tab complete to something, you can hit the tab key again to see the list of files that could be completed with your given prefix. The other possibility is that there are zero matches on your given prefix, in which case nothing is printed when you hit tab a second time.

So now we are in 'adequate_books', what’s next? From our found file above, 'more_books' is after 'adequate_books', so we cd accordingly:

For this directory, observe the difference between ls -l and ls -al. You’ll see that an additional directory is shown when the '-a' flag is given. This flag means 'show all (including hidden files and directories)'. In Linux, any file or directory starting with '.' is considered hidden and will only be shown in specific circumstances.

All of these cd commands could be combined into a single command, but I’ve broken them up here for clarity and exposition. List the contents of 'deepest_secrets':

To see the contents of the file, use cat:

There’s the flag for this challenge!

Try this slightly more difficult challenge with your new found skills:

https://play.picoctf.org/practice/challenge/322

One of the most fundamental skills of a forensics analyst is inspecting and deeply understanding disks. These can be actual hardware or dumps of disks captured in files. There are a few really good GUI tools out there for not just disk analysis, but whole management of digital evidence for cases. Our disk analysis problems will not require any licenses to proprietary software. Some people like to use Autopsy which is a GUI frontend to the tools we will demonstrate how to use in this section. We will use the individual Sleuthkit tools so that you learn a little more than from a GUI that abstracts away some of the details. Disks are all about the details.

Another important field of forensics is packet or network analysis. This field of forensics conerns itself with understanding what has happened on a network through the examination of captured packets. This will require the use of a GUI tool called 'Wireshark', which means you cannot use the webshell to complete this problem. The webshell can be used to complete many introductory problems, but more advanced problems sometimes need a GUI tool to be solved in an efficient manner. Consider this an exercise in installing and using GUI tools. Knowing how to do this will help you greatly in the future.

There are several data structures in python, which are simply structures to organize data in a certain manner. Different data structures have different properties. We are going to introduce one that is called a 'list', which allows us to store several values, one after the other.

We create a list like this:

We can iterate in the list to operate on each item in any way we want. For example, suppose we want to print each item of the list, we could do this:

When you run that program, you should see the following output:

Note that the number 3 printed is the length of the list. You can sort the list alphabetically by calling a function that is part of the list like this:

You should see this output when you run that program:

Now, create a list of numbers, and print it backwards! Using google, it should be very easy to find how to do it.

If you have a piece of code that you want to use often, copy pasting that piece of code is a bad idea because your code gets longer and for a human becomes harder to read. On the other hand, if you want to make a modification in that piece of code, you will have to modify every part in which you copy and pasted that code. We can overcome that by using functions. A function can receive parameters, which are variables you pass to the function so operations with them can be done. Additionally, a function can return a value, which is the result after all the operations are done. Let’s see an example of a function that verifies if a number is even or odd. If it is even, it will return True. If it is odd, it will return False. The program receives any number you input and verifies such an input. Note that the '%' operator in the code is the modulo operator, which calculates the remainder. In this case we calculate the remainder of x divided by 2 and compare that to zero to determine if the number is even or odd. Read the code to understand!

Run that program and try several numbers!

A program might need to have interactions with a user. For example, a calculator expects that the user enters some numbers to then do the processing. Receiving user input in a terminal is very easy in python because it has predefined functions that do it for us. The function ‘input()’ waits until the user writes something in the terminal and presses enter. Note that a function can have zero parameters. Then, the function returns the string that the user wrote, and we assign it to the variable number_iterations’. Here is an example, in which we allow the user to control the number of iterations of our program:

Run that program. When you run it, it will do nothing until you input a number in the terminal and press enter.

In other cases, the data we want to input does not have to come from the user. It could come from a file. We can read all the lines from a file using the function 'open'. Create a file called “pico.txt” in the same folder that you are creating the python programs. Then, in that file copy and paste this text:

Save the file. Now, in the same folder, create a program with the following code:

You should see the following output when you run the program:

As you saw, this program reads a file and enumerates each line in the output. The 'open' function has two parameters, the first one is the path of the file you want to open, and the second has a string with the letter 'r', which means that we want to read the file. 'my_file' is just the name of the file we want to read. Then, we can iterate over each of the lines of the file in a for loop.

Note that this is all made inside a 'with' block. We use the 'with' statement before opening a file to close the file automatically after reading. Also, to handle possible exceptions during the execution. What that means is that when you open a file, you must close it and make sure that it closes correctly. For example, if you do my_file.close(), that would close the file. Imagine that along the way before calling close, something happens and you never get to the line in which you close the file, so you left it open accidentally. Later we will give you more details on exceptions. For the time being, just think of 'with' as an easy way to ensure that the file will be closed correctly.

If you want to save your output in another file, you can easily do it in the following manner:

We introduced some new concepts in this code. This:

Is a cast from an integer to string. We want to convert that integer into a string to be able to concatenate two strings. For example, if we have the string "hello" and the integer 123, and we want to create a string that is "hello123", we can concatenate those two values. But first, we need to convert the integer to string, otherwise python will show an error. To concatenate strings, we use the operator '+'. When we add two strings, python will concatenate them. When we add two integers, python will do a mathematical addition. To represent a break of line in a string, we use "\n".

After this explanation, you should know that this:

Simply converts an integer to string, and then we concatenate a break line to it. We do that, because the function line write() does not add a breakline to the string after it writes it, so we would have a file with a single huge line of text if we don’t do that. When you run the code, you should see no output in the terminal, but if you show the contents of the folder you are in, you should see a new file called 'outputpico.txt'. If you show the contents of that file, you should see the following:

We just learned how to read and create files!

It is a good practice to explain what your code is doing in a comment. In that way, the reader of the code, which may be yourself, will understand what some part of the code is doing. You will realize that when you write some code, you will forget the exact logic and you will have to read it again to understand what you did. In summary, comments are something very important in programming. In python, you write a comment by adding the '#' symbol at the beginning of any line of your code. This line, will be ignored by the python interpreter as it did not exist, so it does nothing in the program. See the following example:

Exceptions are useful in hacking in several cases, for example, when you want an attack to keep executing even if an unknown error occurred. When a program tries to execute an instruction that even though it has a correct syntax, it cannot be done for some other reason, an exception is thrown. For example, if you try to divide a number by zero, that can have the correct syntax to do it, but when the program is executing the line it will stop and fail. Let’s do the experiment:

As you can see the program divides 8 by any number input by the user. If you run it and input for example 2, nothing bad will happen, and you will see this:

Now, run the program again and input 0, you will see this:

An error ocurred because you cannot divide by zero. That is a rule of python and most programming languages. Your program will stop when an error happens, further lines will not be executed. In this case, you could verify that the number is not zero in an if-clause. For this example, let’s fix the program instead using a try-except:

In our previous code, you would print the same message for any error. Try to input a string instead of 0. It will show the same message. If you want to be more specific, you can catch specific errors in the following manner:

Now when you input a string, it will show this:

And if you input zero it will show this:

Note that when an error occurs, the following lines inside the 'try' block will not execute. See that 'result' is not printed, and that makes sense because there was no result to print. The program jumps into the ‘except’ block immediately.

When you call a program from the command line, it is possible to pass arguments in the same way you do with several programs in the terminal. The following program shows how to do this:

Put this code into a file called "args.py". If you run it without any arguments, it will throw an error:

This error happened because the program is expecting an argument on the command line, but none is given. More specifically, the second argument in the argument list is queried sys.argv[1] but it doesn’t exist! Do take note, however, that even without supplying any arguments to the program, the program name is considered the first argument. To run this program properly, we must include an integer argument to our program call:

Take note that since we did not use with to open our file, we had to close it manually with the line:

ASCII is a way in which a computer represents characters. We could say that in memory a computer only stores numbers, but a program can interpret those numbers in a certain way to understand them as characters.

In the following table, it is shown what number corresponds to each character in ASCII:

The ASCII includes all the characters that are used in the English language. For other languages, there is a bigger character set called Unicode.

For example, in the ASCII table, you can see that the @ symbol is represented as the 64 number in decimal.

The table also has a column called Hx or Hexadecimal, which is base 16. Decimal is base 10.

The decimal base is the one we use in everyday life, which likely comes from the fact that humans have 10 fingers. Therefore, we have 10 different symbols to represent all different numbers. In computers, it is helpful to have a base with 16 symbols because it translates easier to binary. You probably know that most computers physically store only binary numbers, which are represented only by 0 and 1. A binary digit is called a bit. Although computers use binary, base 16 is easy to translate from binary for us humans.

The hexadecimal base (or base 16) has the following symbols:

The binary base (or base 2) has these symbols:

The decimal base (or base 10), has the following symbols:

Let’s see in python how can we use the hexadecimal representation to print characters. In a python string, you can put “\x” which is a special sequence to tell python that the following two characters are a hexadecimal number:

When you run that program you should see:

Check the table to see that the characters match!

As a challenge, print the string “I_LOVE_PICOCTF” only using hexadecimal. Note that uppercase letters are represented by a different hexadecimal number than lowercase letters.

For binary exploitation, there is a very useful library called pwntools:

http://docs.pwntools.com/en/stable

Keep this library in mind as an important part of python for exploitation. You do not need to learn anything right now. We will teach how to use it in binary exploitation.

Below is an example of how you can request a web page in python. Here we are requesting the HTML of the picoCTF website. Right now, maybe you do not know HTML and worry this will not make much sense to you. After you are done with the Web section, come back here and try this example:

Before diving into Web Exploits, you need to understand how a website works. Many years ago, the web was used to visit static pages that did not have interactive features; they just showed information. To do a static page, it is enough to write some lines of HTML. What is HTML? First, it is not a programming language. Html means HyperText Markup Language, and we use it to determine the font size, colors, margins, or similar features in a web page. When an html file is accessed in a browser like Firefox, Chrome or whichever browser you like, the browser presents the text according to the html on it. Your browser can access an html file locally. Locally means that the file could be in your laptop or file system. In contrast, it could access the file remotely through the Internet. Let’s see an example of creating a simple html and access it locally:

You just created a page with a very simple HTML that made your message appear in bold. Note that <b> is the opening tag, </b> is the closing tag. Analyze the difference between the opening and closing tag. What do you see? The closing tag is usually the same as the opening tag, but you include "/" like we just did. We just used an html tag to tell the browser we want some specific text in bold. Html is just a bunch of tags that allow us to do similar things.

Now let’s make a page with more fields so you can get a sense of tags and the structure of a bigger page. Use the following HTML code to replace the content of the file you are editing:

As you did before, save the file in the text editor and click refresh on the browser. You probably see something like this:

If you read the html code and try to analyze its content, you will realize the following:

You may have noted the <img> tag is not showing any image as it should. Why? Let’s analyze the element img:

First you see there is not opening or closing tag, there is just one tag with the slash at the right-hand side. This is ok for an image. As you can see, it has an attribute called "src", which means source. We are assigning to "src" the value "picologo.png". Our html is going to try to access a file called "picologo.png" in the same folder where "myFirstPage.html" is contained, which is the folder we name at first "picoexample". There is no image called "picologo.png", so the browser has nothing to show. Copy and paste an image to the folder and name it "picologo.png". The extension of the image has to be ".png". If you have an image with a different extension, you can just use the extension you need in the "src" attribute in your html. For example, if the extension of the image you have is ".jpg" you can simply replace

with

If you successfully created the image in the folder, and refresh the browser you will see the following, of course, with your own custom image:

A fundamental part of web sites are the links. The link tag is <a>, the following is an example of a link directed to google:

Use that element and put it in your code to make a link to the web site you want. Now practice by adding more html tags and images in your page! This is a reference in which you can find more html tags:

https://www.w3schools.com/tags/

To make pages more interactive JavaScript is commonly used. JavaScript is a programming language! We can do algorithms using it. JavaScript is executed in your browser. For example, when you visit a website, the JavaScript code is downloaded along the HTML and it only executes once it is loaded in your browser. When you visit a page, you are downloading an html file and your browser interprets the tags and prints the text and images as we learned before. This image illustrates that process:

If that file happens to contain JavaScript, your browser will execute it. Let’s look at an example. In the same folder "picoexample", create a file called "myFirstJS.html" using a text editor. Then, put the following content in the file:

Save the file. As soon as you open the page, you will see an alert showing "Hello picoCTF", something like this:

If you analyze the file, you will note that the magic is happening in this element:

Whatever you put inside the tags "<script> </script>" will be tried to execute by the browser as JavaScript. Since JavaScript is a programming language, we should be able to do some arithmetic. Replace the string "Hello picoCTF" by an arithmetic operation, like 8*8, like this:

Note that we only use quotes when we want to use a string. In arithmetic operations we don’t use quotes. Save the file and refresh the browser. You should see the following:

Click Ok in the alert message to make it go away. Anything you write in JavaScript or html will be visible for any user that accesses your page in a browser. To see the html and JavaScript code in your browser right click the page and then "View Page Source"

You will see the JavaScript code you just wrote:

This is a very important thing! Never put a secret in your JavaScript code or html. If someone does it, that will be a vulnerability in your page. As a hacker you can try to look for secrets on the html of a page you want to exploit.

Now let’s use some more elaborated code. We are going to make a page that adds two numbers input by the user and shows the result in an alert. We will explain its code in detail later. The code is the following:

Put it on a text file, save it, and open it on a browser as usual. You should see this:

If you put the numbers in each text field, and click "show alert!", you will see the alert with the result. For this example let’s input 4 and 2 in the text fields, you should see:

Now that you know what the page does, let’s analyze the new lines of the code. In this line we have an input tag:

As you can see, it is of type text, and it has an "id" with the value of "number1". The value of the "id", in this case "number1", is something we arbitrarily define to be able to access the content of this text input in JavaScript. This line:

Is responsible for calling the function "myFunctionSum()" when the button is clicked. A function is just a piece of code that we can define, so whenever is called it executes the code inside. In this case, we named the function "myFunctionSum", but is is possible to give it any name. The function has to be defined inside the script tags. Try to read the function and understand at a general level what each line is doing:

Perhaps a confusing part is the following line:

When the variables are defined, both number1 and number2 are textual not numerical. This line turns them into numbers before adding them together. Why don’t you experiment and see what happens when these variables aren’t converted to numbers?

Challenge! Modify the file to multiply the two numbers. When you are done with that, include a new third input number to multiply three different numbers! At this point you should be able to do it on your own. Be careful with the syntax, remember that a single character wrong might break the whole code.

As we said previously, JavaScript is executed only in the browser. What if you want to do calculations and store data in the remote server? For example, when you login into a Website, your user and password has to be verified on the server. The password is stored in the server and should not travel outside of it for the sake of security. If you would verify a password on JavaScript, you would be able to see it on your browser in the same way you can see any JavaScript, and that would be very insecure. There are several programming languages that can be executed on the server, for instance:

For our examples, we will begin using PHP, not because we think is a great language, but because a huge number of websites on the Internet use it and it is very easy to learn and deploy. In any case, as a hacker, you would generally have to learn all the languages you can because different websites are made on different languages, as well as CTF challenges that try to simulate real life! The more a language is used, the more likely you will have to attack a website made with it. However, the vulnerabilities we will be explaining can happen in any programming language, because they are not a fault of the language, but a fault of the programmer that did the website.

Suppose you have a text file named hello.php, containing:

Note that in a file with the extension .php you can mix html, JavaScript, and PHP code! If the server supports PHP, everything inside <?php ?> will be understood as PHP code and run by the server, not by the browser.

Look at the following image carefully to understand what happens:

If you open a file with that content on your laptop, the PHP code will not be executed, because your laptop is not a PHP server (if you have not made it one). So, to execute PHP you need to make your laptop a server. But for the time being, we can use the following:

https://www.w3schools.com/php/phptryit.asp?filename=tryphp_intro

Access that link, and you will see at the right a file with html and PHP code, that when is run, prints "My first PHP script!". Let’s modify the code to additionally print the date, so below the line

Add the line

According to what you have learned so far, that time is from the clock on your computer? Or the time of the clock in the server?

…​PHP is server side code, so that time is from the clock on the server!

Now let’s make an experiment, and add another line with this php code:

That string echoed in PHP has JavaScript code. Is the JavaScript alert shown? What happened? As expected, anything printed on php, will become an integral part of the html downloaded file, so the JavaScript will be executed. This opens the door for the famous attack of Cross Site Scripting (XSS).

After you Login into a Website, the website needs a way to know that any request coming from your browser is coming from a user that previously logged in, without the need to send the user-password again. To do that, the website can send to your browser a secret random value after login. That value is generally stored in a cookie or in JavaScript local storage. For this example, let’s pretend it is stored in a cookie, which is simply a variable in your browser that can retain data. If a Website sets a specific cookie in your browser, your browser automatically re-sends that cookie in each request to the website. If a website only uses cookies to retain a session, and if a hacker can steal the authentication cookie from you, they could pretend to be you! Note that only using cookies for authentication will open the possibility of Cross Site Request Forgery (CSRF), but this will be explained later, for now let’s focus on XSS.

Suppose you are a hacker in a social network. When you create your account, instead of using your name, you input JavaScript code. When a friend of yours visit your profile, the WebSite will try to print your name, but your name is actually JavaScript code, so the browser might execute that JavaScript code. In that way, you could execute your own JavaScript on your friend’s browser!

When you get to execute JavaScript in someone else’s browser, you can read their authentication data, which can be a secret value placed on a cookie or JavaScript local storage after a user logs in. At that point, your friend’s account would probably be compromised!

An important skill to have, is to use the browser debugger. For this explanation we will use Firefox. You can download and install Firefox here:

https://www.mozilla.org/en-US/firefox/new/

Note: If you really don’t want to use Firefox, every browser has a debugger that you can google how to use it. It will not be that different.

Using Firefox, input your name and some text in the description in the following link:

https://primer.picoctf.org/vuln/web/sign_up.php

Open another tab and visit the following link. You should see your name and description:

https://primer.picoctf.org/vuln/web/tableusers.php

Now, in the Firefox Menu, click "Web Developer" and then click "Debugger". You should see a pane like the following:

In that pane, click "storage". At the left click "cookies" and click the domain you are currently on. You will see a cookie that has your name in the value!

You can only see your cookie. Other users would see their cookie with their name. For this experiment, you will steal your own cookie. But with the same method, you could steal the cookie of someone else.

For now, access this link again:

https://primer.picoctf.org/vuln/web/sign_up.php

Create a new user that has your name, but instead of the description has the following code:

If you navigate this link again, you will see your JavaScript code triggered:

https://primer.picoctf.org/vuln/web/tableusers.php

Like this:

You just verified that you can inject JavaScript in the website. Now we are going to inject JavaScript that will steal the cookie. Create another user in the same link for creating users:

https://primer.picoctf.org/vuln/web/sign_up.php

But now, put this JavaScript code in the description:

Let’s understand the code. The first line, imports a library called jquery:

A library is a set of functions that allow us to do some actions in an easier manner. In this case, it allow us to do requests and send data from JavaScript to a server. We are just sending the cookie to a remote service that is made to receive cookies from this exercise. That service receives two variables: "cookie" and "hackername". The value of the variable cookie will be "document.cookie". Here, instead of "=", we use ":" to assign a value to a variable. Using document.cookie you access the cookies from JavaScript, so that should contain the cookie you want to steal. The variable hackername simply has a name assigned. You could replace the string "YourName" with your actual name. Remember that a string must be inside quotes in JavaScript.

The function:

Is simply a function that will be executed after the request is sent to the service, and will alert a message.

Now visit this site again:

https://primer.picoctf.org/vuln/web/tableusers.php

When a user visits that site is when the JavaScript is executed and the cookie is stolen. You should see the message:

If you injected scripts previously, all those scripts are stored in the web site and will be executed in the order you injected them when the page that prints them is visited.

Now you should be able to see the cookie you stole here:

https://primer.picoctf.org/vuln/web/tablestolen.php

At this point you should have some understanding on how a website works. You are ready to begin to do more web challenges on the picoCTF!

To use cryptography in real life, you should never use your own implementations. To begin, we will demonstrate how to encrypt a file, without any knowledge in cryptography. Go to the picoCTF webshell at:

https://webshell.picoctf.org/

When you are there, create a file called 'my_name.txt' containing your name. You could use the 'nano' editor, but in linux it is possible to do the following trick: If your name was 'samuel', you would run the following command to create the text file:

The 'echo' command simply outputs a string, and we are redirecting that output to a file. For example, if we just run

You will simple see 'samuel' printed on the screen. Now run:

and you will see the file you created:

If you run the command:

you will see the content:

Now, create another file with your last name called 'my_lastname.txt'. You can use the same technique to create 'my_lastname.txt':

We will move both files to a new folder, then compress that folder, and then encrypt it! Compressing a folder just makes several files or folders to appear as a single file, and they would take less space on disk, but compressing does not provide any security. Anyone would be able to simply decompress it and see the original content. However, encryption will prevent obtaining the original content without the key. To do that experiment, create a directory called my info:

And move both files inside using the command mv (mv means move):

Navigate to the folder 'my_info' and make sure that it contains the files. Now, come back outside my_info folder, and compress the folder into a zip file by running:

Note that my_info.zip is the name we chose for our compressed file, and '-r' means recursively, which in this case means that we want to compress everything inside the folder. If you run

You should see the folder and the compressed file:

Now remove the folder by running:

'rm' means remove, and '-r' means recursively and indicates we want to remove everything in the folder:

Now, if you run

you should see only your compressed file:

You could easily uncompress the folder by running:

And obtain the original folder:

Now, let’s create a zip file protected with encryption, so it cannot be uncompressed without a key. In this context, the words 'key' and 'password' are synonyms.

Let’s first remove the .zip file we already created by running:

Now, let’s create our encrypted zip, by using a password, with the following command:

You will be asked to input a password and verify it, so remember the password you use to be able to decrypt it later:

If you run:

It will ask for the password, and only if you input the correct password, you will get back the original content!

It is not possible to obtain the original content without the password because it is used to do operations with the content to obtain the resulting encrypted file. At this point you might have no idea of what happened. There are many algorithms for encryption, that were created since the antique Rome. Old ways of encrypting data are easily broken nowadays. Even relatively new ways of encrypting data are broken easily today. Some of them are considered unbreakable right now, but will be broken in the future. Let’s begin to understand how encryption works!

"Cipher" means a secret or disguised way of writing a message. It can be thought as the same as encryption. One cipher method invented in the antique Rome and named after the emperor Julius Caesar who used it for his private communication is Caesar’s cipher. This cipher simply substitutes each of the letters of a word by another one that is a certain number of positions further in the alphabet. That "certain number of positions" is called the shift. For example, if we have the word "hello" and we want to encrypt it using Caesar’s cipher with a shift of 3, we would replace the 'h' by 'k' because 'k' is 3 positions further in the alphabet, the 'e' by 'h' for the same reason, and so on. We called the original text we want to encrypt the cleartext or plaintext. The result of encrypting 'hello' using Caesar’s with a shift of 3, is the following:

cleartext → h e l l o

Encrypted text → k h o o r

"Decrypting" means obtaining the clear text from the encrypted text. For Caesar’s cipher we simply do the same but in reverse; we subtract 3 positions in the alphabet to each letter.

Note that when we get to the end of the alphabet after adding positions while encrypting something, we simply overlap the alphabet. For example, to encrypt the letter 'z', we would encrypt it using the letter 'c'.

To make sure you understand the decryption, decrypt the following text using Caesar cipher with a shift of 3:

s l f r f w i

The result is something you probably know. Hint: the first decrypted letter is 'p' .

Caesar’s cipher is a substitution cipher, because it replaces each letter by something else. In a substitution cipher, you don’t necessarily need to replace a letter by another letter. You can use any symbol if you know how to reverse it.

To practice, go to the webshell. Once you are there, create a python script using:

We will use a python code that encrypts and decrypts only lowercase letters using Caesar cipher. This is how it looks:

Copy and paste the code into the file, save the file by pressing control+x, press enter, and then execute it with:

You should see the following output:

Read the comments in the python source code to understand it. You probably noted the '%', which is called the modulo operator. That allows us to wrap around a number, because it calculates the remainder of the division. We will see more detail of this in the future, so do not worry too much about it for now. But, know that if we want a number to start from 0 again if it surpasses certain threshold, we can use modulo operator. In this case, we use it because we only have 26 letters in the english alphabet. So, the first position is 0, which contains 'a', because arrays start at zero. The last position is 25, which contains 'z'. So, if we want to encrypt 'z', we would need to add 3 positions, and 25+3 is 28, but after 25 we need to begin from 0 again because of the way that caesar works. Modulo operator works perfect for that because:

26%26 is 0

27%26 is 1

28%26 is 2

So, as we said before in an example, the letter 'z' would be encrypted with 'c', which is in the position 2 considering that arrays start at 0. Other thing that you maybe did not understand at once from the code, was that we subtracted 97 from the ASCII value. Go to:

http://www.asciitable.com/

Note that the letter 'a', is in the position 97, so we simply subtract 97 to apply the overlap trick with modulo 26. Note that this trick would also work by not subtracting 97, but instead applying the modulo on 123, like in the following code:

Can you explain why?

Challenge: Modify the python script to be able to encrypt and decrypt upper case words.

In transposition ciphers, we don’t replace the letters by other symbols, but we simply change the order in which they appear on the cleartext. For example, we can decide that our encryption algorithm simply moves the letters to the right and overlaps. Let’s encrypt the word 'pico' by rotating its letters by one position to the right.

clear text → p i c o

encrypted text → o p i c

This is a very simple kind of transposition. But you can have a map that makes more complicated transpositions. For instance, you can decide that you will encrypt a text by doing transpositions in chunks of 6 letters using the following mapping:

The number indicate the position of the letters. Using that mapping, let’s encrypt the word 'pico'. Since pico only has 4 letters, we can simply use a padding to complete until 6 letters. For this example, we will use the symbol * as padding, so we have:

The encrypted word is 'c*ip*o' using our arbitrarily defined mapping. Suppose we want to encrypt a long text. In that case we simply apply the same mapping each 6 characters.

So far, we saw how transposition and substitution ciphers work. If they are used only by themselves, they are very easy to crack. On the other hand, if someone finds out the algorithm we use to encrypt, the encryption is broken forever! A way to improve this, is by using encryption algorithms based on a key.

There is a principle in cryptography called the Kerckhoffs’s principle that states: "A cryptosystem should be secure even if everything about the system, except the key, is public knowledge". That principle professes to overcome the fact that once the encryption algorithm is known by the enemy the encryption is broken. The solution is to use a key. One old algorithm that was used to encrypt data using a key was "Vigenere". It looks certainly stronger than the previous algorithms we learned. Even though it is easily breakable nowadays, in its time it was considered unbreakable.

To understand how Vigenere works we will encrypt the cleartext:

"I LOVE PITTSBURGH"

First, we remove the spaces, because the Vigenere table does not have the space. However, a human can easily recognize the words of a text even if it has no spaces. We get:

"ILOVEPITTSBURGH"

Now, we can pick a key. For this example, we will use the key "PICOCTF". Since our text is larger than the key, we simply repeat the key several times until we get the same length in the following manner:

Plaintext: ILOVEPITTSBURGH

Key: PICOCTFPICOCTFP

The first letter of the cleartext is paired with the first letter of the key. So, we have the pair ('I','P') Now in the vigenere table that is presented below, we use row i and column p. The cell at the intersection of the column and the row will be the encrypted letter, which in this case is X. We do the same for the rest of the letters, and we would obtain the following:

Cleartext: ILOVEPITTSBURGH

Key: PICOCTFPICOCTFP

Encrypted text: XTQJGINIBUPWKLW

Now let’s see how decryption works. Suppose we only have the key and the encrypted:

Key: PICOCTFPICOCTFP

Encrypted text: XTQJGINIBUPWKLW

We take the first letter of the key, which is 'P', and go to that row in the vigenere table. Then in the row 'P', we find the first letter of the encrypted text, which is 'X'.The column that corresponds to 'X', is the first letter of the clear text, which in our case is 'I'. You repeat the same process for each character until you get 'ILOVEPITSBURGH'.

To verify that you understand the decryption, decrypt the encrypted text "WMNZQAJ" using the key "HELLO", remember that if the key is shorter, you just repeat it. You should obtain a word you will easily recognize!

Vigenere is easily broken even without a computer. Simon Singh, a famous science communicator, has a nice tool on his website for cracking Vigenere:

https://www.simonsingh.net/The_Black_Chamber/vigenere_cracking_tool.html

Cracking ciphers is a field itself called cryptanalysis. Cryptanalysis and Cryptography compose bigger field called Cryptology.

In modern cryptography exist the concept of symmetric and asymmetric cryptography. Symmetric cryptography means that you use the same key for encryption and decryption like we just did on Vigenere. In asymmetric cryptography you have two keys. One is for encryption, known as the public key, the other one is for decryption, known as the private key. Asymmetric cryptography is useful because it can be used to solve the problem of a key exchange. Additionally, it can be applied for digital signatures that provide integrity and non-repudiation.

In a tool called Wireshark, we can “sniff” the packets transmitted on a network. The technical term that is used to refer to a tool like Wireshark is “sniffer”.

Go here for instructions on installing Wireshark if you have not already: Installing Wireshark.

Once you install and open it you should see a window similar to this:

That is the list of devices you can sniff. In this case, we want to sniff the network card you are using to connect to the internet. If you are connected to a WiFi, you should select the one that is called “WiFi”. In case you are connected to the Internet using Ethernet cable, you should select “Ethernet”. Then, click the “start capture” button on the upper left side which is circled in the following image:

The capture now starts. If you have applications running on your computer or have website open in your browser, you will probably see several packets immediately, let the Wireshark window continue to run the packet sniffing. In your browser, navigate to the following link:

http://primer.picoctf.org/vuln/web/sign_in.php

You should see the following page:

Now come back to the Wireshark window. What we want to do now is finding the packets that were sent and received in your computer when you accessed the link. If there are too many packets from all the connections on your computer, this task would be too hard task without the help of a Wireshark filter. A Wireshark filter allows you to tell Wireshark that you only want to see some specific packets. You can filter by protocol, IP, strings present in your request, or anything you need that helps you find what you are looking for faster. When we accessed the link on the browser, we did an HTTP request. We can filter HTTP requests, by simply typing http on the filter textfield and pressing enter. The following image shows the results and we circled in red the textfield in which you have to type:

Right below the textfield in which you typed is the packet list. We can see two packets. The first one is the request your browser sent to the server asking for the web page, so naturally it has your IP as the source, and the IP of the server as the destination. The second packet is the reply, which now has your IP as the destination and the IP of the server as the source because now the server is the one that is sending the page to you after you request it.

In the lower part of the window, we can see the information related to all the layers we explained previously of the currently selected packet. Now, we will send a user and password to the web site. This page in particular does not do anything after you send a password, it just receives it, but the important thing is to note that we can see the password on wireshark when we send it. In the web page, type the following in user and password respectively:

picouser

picopassword

In Wireshark, you should see now two more packets, one in which you send the user and password, and the reply of the server. Note that the reply of the server is the same page, as we said this page does nothing. So far, we have 4 packets, and the third one is the one in which you send the user and password!

Click the third packet, and in the lower part of the window where the layers are visible, click “Hypertext Transfer Protocol”. Note that at the end we can see &password=picopassword

We just found the password we sent using sniffing. A fundamental thing to note, is that we were able to do that because the website was using HTTP, instead of HTTPS which is encrypted. Encryption prevents us from understanding the contents of a packet.

Additionally, we are always able to sniff the network card of our own computer. However, if we want to sniff packets from other devices connected to the same WIFI, we must do additional things because WiFi could be using encryption. We encourage you to use a second device, it can be a smartphone, to access the web page and send a password. Then in your computer use Wireshark to capture the password sent, but first you need to do two things:

Enable monitor mode in Wireshark: Stop any packet capture you are doing and open the capture dialog, which is located in the upper part of the window and click “options”Choose Wifi Interface and check “monitor” as in the following image:

Decrypt WiFi connection: You can do this only if you have the password for the WiFi you are sniffing. In the following link there is a very good article that explains how to do it:

https://wiki.wireshark.org/HowToDecrypt802.11

Note that WIFI encryption is encryption of the datalink layer, which is different to the encryption provided by HTTPS which is in the application layer. Even if you decrypt the WIFI connection, if a website is using HTTPS, you will not be able to see anything from that website on Wireshark.

SQL is used to create and manipulate a very common type of databases called relational databases. SQL stands for Structured Query Language. With it you can create tables in a database, store data on them, and run different queries that let you extract and analyze data. We are going to see some examples in a relational database management system (RDBMS) called MySQL. Once you learn the basics of SQL in any RDBMS, it is easy to apply them in others. We are going to see a very quick introduction so you are able to understand the hacks. Let’s begin.

As we said, information is stored in tables. The following is an example of a table that we might call "user":

There are several online tools that you can easily find on Google to learn languages. For example, access the following web site:

https://paiza.io/en/projects/new?language=mysql

We can execute MySQL statements online. So, let’s create our table from the previous example on it. First, delete the code present in the editor. You should be seeing something like this:

Now, you can create the table using the following statement:

create table user (id integer, name text, lastname text, phone text, password text);

Analyze the statement carefully. This statement creates a table called "user" with five columns. The first column is "id", and has the data type int, which means integer. The other columns are "name", "lastname", "phone", and "password", which are of datatype text. In datatype integer, as you might guess, you can only store integers. In a datatype text, you can store strings. Put that statement in the SQL editor and hit the button "Run". If it was successful, you will see a green bar on top of the editor with the label "success". When you create tables in SQL, they are stored and become available to insert future data on them. However, in this online editor tables just survive in a single run, so in the same script we will have to create the table, insert the data, and query the data.

So far we have created the table but it is empty. To insert a row, add the following statement:

insert into user (id, name, lastname, phone, password) values (1, 'Jane', 'Doe', '200 111 1111', '123456');

As you can see, the statement is self explanatory. It will insert each of those values in each column of user conforming a new row. Hit run, and verify it was successful. It should look like this:

Now, add the following line that will query the data you have inserted so far:

select * from user;

The * means that you want to see the content of all the columns. Hit Run.

You can see the results at the end. Now insert the two rows missing to conform our 3 row table:

If you are interested in returning only some particular columns, you can list them instead of using the *. For example, let’s return only the name and lastname:

select name, lastname from user;

You will see:

We can make our query more granular if we add a "where" clause like this:

select * from user where id=2;

Look at the query carefully. We already know that the * means we want to see the content of every column. In the 'where' clause we restrict which rows we want to return. What row do you think is going to return that query?

If you thought about this row:

You were right. That is because that row is the one with the value of 2 in its id. You could filter by any other field. If you are filtering a field of type text, you have to enclose the value in single quotes. Remove the previous select statement, and add:

select * from user where phone='200 111 1111' ;

You should be seeing the following:

Run it. If you look at the rows inserted. 'Jone Doe' had the same phone number as 'Arpit Gupta'. The select statement should return 2 rows like this:

We can also filter by two fields in the same query using the logical operator 'and' in the following manner:

select * from user where phone='200 111 1111' and name='Jane';

After the "where" clause, you can put several boolean expressions. As you learned previously in the programming chapter, when you use "and" it means that both expressions have to be true so the expression is true. The query should return this:

Now, add another 'and' operator, to try to filter using a name that does not exist in the table:

select * from user where phone='200 111 1111' and name='Jane' and name='Mario';

The query should return no results, because 'Mario' does not exist in our database:

Now, as an experiment add another filter, but this time use "or" instead of "and". For example, run:

select * from user where phone='200 111 1111' and name='Mario' or name='Arpit';

You will see:

What happened here? Analyze the query carefully. You know there is no one called Mario in our table. Why in the world does the query return a row? If you think about it, any expression, no matter how long it is, if results in False, but then you do "or" with something that is true, it will be true. For example:

1=2 and 3=2 and 47=1 or 1=1

Will be true, because (1=2 and 3=5 and 45=1) is false, but (1=1) is true. This is fundamental for the basic SQL injection attack.

Try the following:

select * from user where phone='200 111 1111' and name='Mario' or 1=1;

You just returned all the results! That happens, as you might guess, because "1=1" is always true. As an exercise, create a new table with new data and create new queries.

The objective of the basic SQL injection we are learning is to try to inject an "or" expression that is always true. In that way the server code constructs a query using the user input that deceives the program into it returning the whole table. That happens when a program is concatenating strings to construct a query in the server code. The following is an example in PHP:

"SELECT * FROM user where name='".$name.""' and password='".$password.""';"

The green part of the query will be concatenated with the value of the variables to form the final query. Let’s suppose that $name is equal to "samuel", and $password is equal to "hello", the query would result in

SELECT * FROM user where name='samuel' and password='hello';

What would happen if the password contains a single quote? That might break the syntax of the SQL query. Even worse, it could be used to inject your own sql. For example, if the value of $password is:

' or '1'='1

The resultant query would be:

SELECT * FROM user where name='samuel' and password='' or '1'='1';

Which is a perfectly valid query that will return the whole table. Use what you just learned here to return all the users:

https://primer.picoctf.org/vuln/web/basicsql.php

This kind of vulnerability is rarely present in applications. One that is more common, is the blind sql injection.

In this kind of vulnerability, the application does not return all the data to you. However, it is enough that the application shows an error message saying that no data was found or that an error has occurred, to figure out the content we are looking for.

To illustrate this, we are going to attack the following page:

https://primer.picoctf.org/vuln/web/blindsql.php

If we input our previous injection in the password field:

' or '1'='1

We will see that the application found something and shows the message "REGISTER FOUND":

Internally, the injection deceives the application into returning records, but the application did not show us those records. That’s why it is called Blind SQL injection. We can inject SQL, but we cannot see the result!

What can we do about this? We will try to inject a SQL to guess one character of a field at a time. Suppose we want to guess the first character of the password. If we don’t guess it, the application will return "NOTHING FOUND". If we guess it, it will return "REGISTER FOUND".

Note, this is fundamental to be able to guess only one character at a time. Trying to guess a whole string at the same time, is much harder. Suppose a word is made up by a combination of the 26 characters of the alphabet. To guess only the first letter, we only have to try 26 values. However, if we try to guess the whole word, is much more complicated. To illustrate this, suppose we have a word of two letters. If we can guess one at a time, we will need at most 26 trials for the first one, and 26 trials for the second one, for a total of 52 trials. On the other hand, if we try to guess both letters at a time, we will need 26*26 trials, which is 626 trials, because they can have different combinations. If we add more characters, guessing the whole word becomes much harder because it would emerge too many possible words. Nonetheless, guessing one letter at a time, will keep being only 26 trials for each letter. The blind SQL injection is based on that fact, it will try to inject a query that only compares one character at a time.

To be able to do that, you need to know the name of the column you are trying to guess. This is not that hard, because in many cases you can infer the name of the database column based on the name of the html input. In other cases, you can leak the name if an error occurs inside the application, and in the error message the application shows the value of the columns.

For the page we are attacking in this example the names are the same as the html input. One column is called 'username', and the other one is called 'password'.

So far, you know that if you inject:

' or '1'='1

It will return results, but you are not learning any information. We know two column names, 'username' and password. For this example, suppose you know a user called 'picoctf' and you want to get the password from that user. To narrow down the query to the row in which the user 'picoctf' information is stored, you could use:

' or username='picoctf

Note that we do not use the '1'='1 anymore because we want a statement that will filter only one user. If you inject this on the password field from the web page, you will still see:

Remember that in our injection, if the part at the right of the "or" is true, it will return results. It is true that username is equal to 'picoctf' only in the row on the picoctf!

Now we will add the part that compares the first character of the password. We can do that using an embedded query. An embedded query is a query inside a query. Our embedded query highlighted in green, will simply return the first character of the password. We will compare that first character with the character 'a', so we are guessing that the first character is 'a':

' or username='picoctf' and (select substr(password, 1, 1))='a

If you inject this, you will see that nothing is found:

This is because we did not guess the first character. If you keep trying different characters, you will find that the first character of the password is 'f', when you inject this:

' or username='picoctf' and (select substr(password, 1, 1))='f

And see as a result this:

You could possibly find the whole password manually, but it would take too much effort. On the other hand, you may want to obtain all the passwords in the database, or even all the fields from the database! This same process can be applied for any field… In most of the SQL engines there is a system table that contains the names of all tables and columns, so once we find a SQL injections databases we might be able to leak the whole database. For this exercise we will only obtain one password. To be more efficient, we will write a python script that does the job for us. Suppose we found the name of the table in some way. The script is the following:

This script is just one of the many ways in which a blind SQL injection is done. With your knowledge of Python and SQL, you should be able to understand the script if you read it carefully. Note the following:

Depending on the SQL engine, there can be several ways to inject SQL. Even Frameworks that handle the queries for you, might have vulnerabilities in some versions, or because they are used incorrectly by developers.

Keep up the good work!

High-level languages are the most abstract. They are meant to be easy to read by other developers and fast to code in. They are also meant to be portable, which means they can be run on many different kinds of hardware like your desktop, phone, or server.

These languages are often used to write applications or scripts, due to their ease of use. Since many programs do not need to be used by anyone other than the developer, it makes sense that developers often choose a language that is easiest for them.

Some examples of high-level languages are Python, Nim, and Perl.

In order for these languages to work, they need to be translated into a lower-level language. This is done by a compiler or interpreter. Here are some comparisons between high-level languages:

Each of these examples does the same thing, but the syntax is a bit different. This is because each language has its own rules and conventions. However, a computer is still able to execute the code in the same way because of the translation to a lower level like machine code.

If the developer is not confident, a high-level language can also protect them from accidentally writing insecure code that may be vulnerable to attacks like buffer overflows. These can be avoided in low-level languages, but the abstraction and easier syntax of high-level languages can help prevent these mistakes.

Low-level languages are less abstract than high-level languages. They are meant to be fast and easy for the computer to understand, not necessarily the developer.

These languages are often used to write operating systems, drivers, and other software that needs to interact with the hardware.

Some examples of lower level languages are C, Assembly, and Rust. We say lower level here, and not low level, because abstraction is also a relative concept. Assembly may be more direct to hardware than C, but C is lower level than Python. For comparisons between lower level languages:

Compared to the higher level languages, these are a bit more verbose for us as readers and developers. However, to the computer and hardware, not much has changed. We just see more of the details that were abstracted away by features in the higher level languages.

These languages will also need to be translated into machine code for the computer to run, but they can execute faster because they can take advantage of hardware features and optimizations that interpreters may not be able to.

Intermediate Representation (IR) allows for interpreters and compilers to work with code in a way that is more abstract than machine code, but less abstract than high-level languages.

This can lessen the gap between high and low level languages, and allow for some optimizations and other features that are otherwise not possible in high-level languages. IR is often used for applications that may be run on many different kinds of hardware, like web browsers. Rather than compiling the code several times, the IR can be optimized for multiple types of hardware, and the code will only need to be translated once to an IR.

Some examples of IR are LLVM and WebAssembly. These can be useful when reverse engineering, as IR can be easier to work with and understand than raw machine code.

We have touched on assembly language before when considering C. Assembly is even less abstract than C, and consists of instructions that are directly translated to machine code. When writing in assembly, a developer has to consider the architecture of the hardware that the code will be run on, as each has its own set of instructions. This can be impractical for most applications, but is necessary for some software that needs to be as fast as possible.

ISA, or Instruction Set Architecture, is the set of instructions that a particular hardware architecture can understand. This is what assembly language is written in, and is what the compiler or interpreter will translate high-level languages into.

Some examples of ISA’s are x86, ARM, and MIPS. When reverse engineering these, a hacker will need to understand how the assembly code will differ between what they may be familiar with.

Finally, machine instructions are the lowest level of code, and have no abstraction. These are the instructions that the hardware can understand, and are what the compiler or interpreter will ultimately translate the code into.

These instructions are often represented in hexadecimal, and are not meant to be read by humans. It is still possible to access these instructions with tools like debuggers and hex editors, but it would be difficult to understand what is happening without a deep understanding of the hardware and the ISA.

With each level of code, abstractions can take shortcuts that may be exploited by attackers. For example, a high-level language may have a feature that is meant to make it easier to work with strings, or a low-level language may have a feature that is meant to make it easier to work with memory, but these both may have vulnerabilities that can be exploited.

Keep in mind the following aspects of C:

Now, the same in C, would look like (the 'f' at the end of print is necessary):

But in C, we could do:

And it would work. But it is important you do not write it like that if you begin to do programming in C, because a program can become very unreadable. Always use indentations on C, even if they are not mandatory.

Let’s get hands on now! Access the picoCTF webshell at:

https://webshell.picoctf.org/

Create a folder called 'c_examples' using:

Go inside the folder using:

Now, create a file called "my_c_example.c" in this file, we will write the C code. You can create the file with:

Into that file, write the following code, which will print "Hello World!"

Note that this line:

Is used to import a library, which is a set of functions, that allows us to read and write from the terminal in our program. This:

Is the function printf, which we can use to print strings in the terminal. The function main:

Is the function that wraps the code of our program. Note that in C, the content of function is enclosed in braces {}. By convention, main is the function that would be executed in our program, even if we don’t call it. In C, functions return a data type. In this case, main returns an 'int', which means integer. That is why we see the word 'int' right before 'main'. This line:

Is our main function returning the integer 0. When the main function returns, that marks the end of our program.

Now save the program. Remember that in the nano editor, you save the program by pressing in your keyboard 'control' and 'x' at the same time. Now, to compile our program, we will use 'gcc' which is a very famous compiler; 'gcc' means 'GNU Compiler Collection'. To compile the program, run:

You will see no output on the screen if it compiled correctly. However, if you list the contents of your current folder using:

You should see a new file created, called 'a.out'. The is your new executable binary! You can run it using:

You should see printed the message 'Hello World!' on the screen. Note that we can execute the binary with no additional program, as we had to do with python, in which we needed the python interpreter, hence we wrote 'python' before the name of our program.

What if we want to give a name to our binary when we compile it? We can do:

If you list the contents of your folder using:

You should see the file 'my_binary' listed. You can run it using:

And it will show 'Hello World!' as it did before.

Before proceeding to do more interesting programs, let’s stop to learn the data types in C. In python, you can create a variables without specifying the data type. However, in C, you need to specify it. These are fundamental data types in C:

In C, you could have the following code using those data types:

Create the file 'print_data_types.c':

And put the previous code on it. Compile it with:

And run it with:

You should see the following output:

We just saw how to print different data types. Things to note:

An important thing to note, that we already mention, is that a character is just a number that is interpreted as such. Do the following experiment: use %i instead of %c to print the character 'p' in our program. What number do you see and why that number?

Answer: You should have seen 112. That happens because 112 is the ASCII of 'p', as we can see in the ASCII table:

http://www.asciitable.com/

When you need to store a list of integers, you could use a buffer of memory to do it, which is just a chunk of empty memory that can be filled with the integers you need. For example, suppose we need to store a list of 5 integers and the print the whole list. We could do something like the following:

In the line 'int arr[5];' we are declaring an array of 5 integers. So the program allocated a buffer of 20 bytes, because each integer takes 4 bytes. Then we assign an arbitrary integer to each of the positions, and then we print them on a loop.

In C, the first line of a for loop is made up of three parts: In the first one, you can declare a variable and set its starting value. That is 'int i=0' in our code. The second part is the condition; the loop will keep iterating as long as that condition is met. In our code the condition is 'i<5'. The third part is generally a modification you do so the loop advances. In this case we increment i by 1. Note that in C this:

Is exactly the same as this:

Inside our loop, we print our counter 'i', and the current value at position in 'i' in the array. Put that code in a file using:

Compile it:

Run it:

You should see as the output:

So far, everything seems to work fine. But now, add the following line after the for loop:

You might be thinking that line would cause an error, because we don’t even have a seventh position in our array. However, it will not! Compile again and run the code. Remember to always compile. If you are used to python, you might forget that step. Do not forget it! The code looks like this:

And the output, should look, somewhat, like this:

What is going on here? We did not even have a 7th position. Our array is actually only 5 positions in size. This is something bad. What is happening, is that C does not actually have real arrays with size as other languages do. It is merely a chunk of memory. In this case, our variable 'arr' is just a pointer to the first byte of that chunk of memory. When we do, for example, arr[2], we are pointing to the first byte of the chunk of memory plus 8 bytes, because each integer has 4 bytes, so we move in memory to point to the place in which is stored the third position. You will understand this better as you advance in binary exploitation and understand how variables are placed in memory. For now, just know that C allocates the memory needed to place a buffer, but does not have any control that prevents you accessing the wrong place. In our example, 1695902208 is value from our program that is 8 bytes away from the spots in which or array should be stored, it could be other variable. Many people claim that C does not have real arrays, because as you saw, it is just a chunk of memory.

In C, you can create not only variables, but also pointers to variables. A pointer simply stores the address in which a variable is located in memory. Now that you can read few lines of C, it is better to explain a program using the comments on C to explain the things that might be new to you. So, let’s take a look at the following program that illustrates pointers in an easy manner. Pay close attention to the comments. Create a file, paste that code, compile it, and run it as you already know how to. The following program might seem a bit long, but it is because it has several prints so you can understand what is happening. Is very easy to read. This is the program:

At this point you should know the commands for creating a file, compile it, and run it, but just in case:

Note that the compilation shows several warnings, because we did things, for the sake of the example, that are not good practice.

With this introduction to C, you will be able to begin to read the source code from challenges and clarify new things you see along the way on Google. Now it is approaching the real fun of binary exploitation!

A hack is not necessarily a cyberattack. It is just a clever way to do something, in our context, on a computer. For example, how would you make a program to print the smallest of two numbers without using an if statement? This sounds complicated when you first hear it, but look at the following bit hack! Make a small program in C copying this code:

That was fantastic! What is happening here? Keep in mind the results of the following operations:

Now, we have y=5, x=9.Let’s analyze each part of:

y ^ ( ( x ^ y ) & - ( x < y ) )

In the part highlighted in bold:

y ^ ( ( x ^ y ) & - ( x < y ) )

x < y is false, in c false is represented as a 0, that in a byte would look like this: 00000000

-0, is 0, so it keeps being 00000000

So, -( x < y ) is 0. So far we would have

y ^ ( ( x ^ y ) & 0 )

Now

y ^ ( (x^y) & 0 )

( x ^ y ) & 0 is 0 , because any value & 0, is still 0

So we get to

y ^ ( 0 )

This is simply y ^ 0 , when you take any value and do XOR with zero, it is like doing nothing!

So we get to y which is the smallest number (cool!!!!!!)

But what happens if the values of x and y are swapped, surely it will not still print the smallest number? Swap the values in your code, compile and run it again to see what happens!

That was amazing. That is a beautiful hack! It is actually called a bithack! In a computer, this operation executes much faster than an "if" statement. In most of the programs you don’t need to execute an operation that fast to comply with the functionality you need, but in some cases that is needed.

Let’s say that a hack could be simply a clever thing. Now, what is an exploit?

It is an attack on a computer program. If a computer program has a vulnerability, a hacker can take advantage of such a vulnerability to make the program do something different from the original purpose of the program. Taking advantage of a vulnerability successfully, it is called an exploit.

By this point you should already know how to use the terminal, compile programs and have some understanding of C programming. Create the following program in the webshell, and name it vuln1.c:

You can see that the function win() is never called in the program. Therefore, the message that it prints should never be printed. right?

Compile the program using:

gcc vuln1.c -o vuln1 -fno-stack-protector -no-pie

Now run the program using:

./vuln1

You can input a string, and it will print it back. For instance, if you input "HelloPicoCTF", it should show:

Input a string and it will be printed back!

The program did what it was written for. Now, we are going to send a particular string to the program using python. You can run a single line of python in the command using the flag -c, and enclosing the line of code between single quotes. In the terminal you can pass the output of one command as the input to other command using the pipe, which is this character "|". In the following command we are printing something in python, and passing that to the C program we just compiled.

You should see "hello world!" printed back to the terminal right after the command. Note that in python you can repeat the same character if you multiply it by a number, so 128*"A" is simply a string composed by 128 "A" repeated. For example if you run:

You should see the output:

Now we are going to send a string that is composed by 128 characters repeated, concatenated to some bytes.

As result you will see:

What just happened? We simply sent a string, and a function that is never called in the program was called… We can send some particular input to the program to break it and make it do something that we want. That "particular input" you send to a program in the security jargon is called the "payload".

You just hacked a very simple binary. But…​ what happened on the inside? Why? A very rough explanation, is that when you call a function, the computer needs to know how to come back to continue executing the code that called it after the function finishes its execution. The address of the piece of code that you should continue on after the function call (you do not see this in the source code), is called the return address. Since the program is not checking the boundaries of the input in the C program we made, you can overwrite the place in which the return address is stored! Let’s understand that better so you can manipulate similar exploits at your will.

The famous Stack Overflow is a type of Buffer Overflow, an anomaly that overwrites a memory sector where it should not. It causes security problems by opening doors for malicious actions to be executed. To understand it, it is necessary to have an idea of how the memory of a computer works.

The execution of a program and its memory is controlled by processor registers, usually called simply registers. These are a very small and fast kind of memory that is attached to the processor. A register can store 4 or 8 bytes, depending on the processor. A processor only has a few registers. Depending on the kind of processor, the registers might differ. But we will take a look at the ones that are generic to most processors and will let us understand later the most common binary exploits.

To see a real example in action we can use GDB, a software that allows us to see the execution of each part of a programs and its memory step by step. This kind of software is called a debugger. When a binary program is running and we debug it, we can see in detail what the program is doing in memory by analyzing the Assembly. What is the Assembly? It is a low level language that can be used to show what each instruction from the machine code does. GDB can generate assembly from the machine code in memory while we are debugging the program so we can easily see what the machine code is doing.

We will show in this part, for reference, the most relevant registers from Intel Architecture for an example of a program in assembly we will introduce. The Intel registers are broken down in several categories. They include General Registers, Segment Registers, Index/Pointer Registers, and Flags registers. For now, it is good to see the purpose of each of the registers in two of those categories.

Note that in the General Registers, when we are using processor of 64 bits, the register name begins with R. In a 32 bits processor, the register name begins with E, and in 16-bit architecture, it does not have a prefix and the name is only two letters. For example, there is a 16-bit register called AX. In 32 bits, we have the same register for the same purpose, but it can hold 32 bits, and it is called EAX. In 64 bits, that same register is called RAX. We can use a 16-bit or 32-bit register in a 64-bit architecture, but not the other way around. Each register is conventionally used for some specific operations, but they can be used for other purposes. These are the General Registers in 16, 32, 64 bits: RAX,EAX,AX (Accumulator register): It is usually used to place the return value of a function but can be used for other purposes.

RBX,EBX,BX (Base register): Used as the base pointer for memory access. We subtract or add an offset to the value of this register to access variables.

RCX,ECX,CX (Counter register): Usually used as a loop counter.

RDX,EDX,DX (Data register): Usually used to store temporary data in operations.

Note that in a 64 bits program, the conventions can change. For example, in a 32-bit architecture we generally pass the arguments of a function in the stack, while in 64-bit programs we pass them in registers in many cases. For now, do not worry about those details. Focus on getting a sense on how assembly works when we show the example of a program in assembly.

These registers are used to mark the end or start of a region of memory to allow a program keeping track of elements such as location of variables or the top of the stack, which are essential to manipulate data in memory.

RSP,ESP,SP (Stack pointer register): Indicates the top of the stack. Whenever we create a local variable, this pointer changes to allow space to that variable. For example, if we create an variable that takes 4 bytes, the stack pointer moves 4 bytes to make room for that new variable.

RIP,EIP,IP (Instruction Pointer): Indicates the current instruction that the program is executing. If we make this register pointing to an address, the program will execute the code at that address.

RBP,EBP,BP (Base pointer register): Indicates the beginning of the stack frame of a function. The stack frame is a region of memory in which we place data, such as local variables, from a specific function. To access a local variable from a function, we take the address of the base pointer and subtract an offset.

RDI,EDI,DI (Destination index register): Generally used for copying chunks of memory, that can be strings or arrays.

RSI,ESI,SI (Source index register): Similar purpose to the previous register (Destination index register).

Now, let’s dive into the assembly of a program!

Go to the picoCTF webshell:

https://webshell.picoctf.org/

Compile the following program:

To do that you can create a file with:

Paste the code in that file, save it with control+x, and then compile the file with:

Run it to verify its functionality with:

You can obtain the assembly of a compiled program without having the original source code with the following command:

That will output the assembly of the compiled program ‘example’ on the terminal. You can redirect that output to a file, which in this case we call dump.txt, using:

That assembly dump has many things. For now, we will focus only on the assembly of the function ‘main’. We can dump the assembly of a specific function, in this case ‘main’, in the following manner:

Also, you can run the program on GDB like this:

Set a break point on main:

And run the program:

Since the program execution stopped at main, you can do ‘disas’ to obtain the assembly from ‘main’:

Note that the instructions on an Intel processor can be represented with two types of syntax. There is the AT&T syntax, which is the one we just printed, and there is the Intel syntax. Note that the syntax is different from architecture of the processor. Here we are on the same processor, which is Intel architecture, but we can use AT&T syntax or Intel syntax. To print intel syntax on GDB, we can do:

If you run ‘disas’ again, you will see the same main function, but in Intel syntax:

In AT&T syntax, there are several differences. One of them that is notorious, is that you see the symbol % all around, which is used to prefix registers. Also, in some operations the position of arguments is different. Keep in mind this to prevent confusion. We will explain the program using Intel syntax, following each line of the assembly code. Remember from the binary exploitation section, that the hexadecimal number we observe at the left, for example this ‘0x000055555555471a <+0>:’, is the memory address in which that instruction of assembly is located on RAM. In the first line of assembly we see in the main function is the following (we removed the address shown at the left for simplicity):

We observe the instruction ‘push rbp’. As we know already, rbp is the base pointer, which is a register used to keep track of the part of the stack in which the local variables of a function begin to be stored. In this case, the current value of the rbp is pushed into the stack, to be able to recover it later. This is an important part of a function that allow us to keep the value of the base pointer from the previous function. For example, suppose you have a function call inside another function, like in the following example in which we call func2 from func1:

The piece of memory in which are stored the variables of a function is called the stack frame. In assembly we do not have variable names, instead, we have the rbp pointing to the memory address in which begins the stack frame of a function. For example, if the program is currently executing func2, the three variables declared in func2, could look like the following in memory:

If we want to access the value of var6, we do rbp minus 3. Note that if we subtract three positions from rbp, we would be pointing to var6. As you can see, accessing variables in assembly is not complicated, we just need to subtract from rbp some positions to point to the variable we want. However, we just have one register in the processor to keep the value of the base pointer. So, what we do, is pushing into memory the value of the base pointer from the previous function. That is the “rbp func1” that you see in the memory from the previous image. We store the rbp from a previous function, as we store a local variable, to be able to recover it later when we come back to func1 and be able to access the variable from func1. We explained all that to point out what was this line for:

In that line of assembly, we are storing the previous value of the rbp, to later restore it when we return from the current function. The instruction push, places the value of a registry into memory, and subtracts the size of the register to the stack pointer. In an Intel processor of 64 bits, a register is 8 bytes. So, when we do ‘push rbp’, it is automatically subtracted 8 to the stack pointer.

In the second line:

We assign the stack pointer value to the base pointer. Mov, in Intel syntax, assigns the value of the operand at the right side to the operand at the left side. In this case, rsp (stack pointer), is the operand at the right side, and rbp (base pointer) is the operand at the left. Such an assignment is done, because at the beginning of a function the stack pointer is pointing to the beginning of the stack frame. When push variables in a function, the stack pointer will move, because the stack pointer will be pointing always to the last variable pushed. Then, in the line:

We are subtracting 16 bytes from the stack pointer. Note that the prefix ‘0x’ is used to denote a hexadecimal number. 10 in hexadecimal is 16 in decimal. In Intel syntax, the instructions ‘sub’ subtracts the operand at the right side to the operand on the left side. In this case, we subtract 10 from rsp. That subtraction is done to allocate 16 bytes on the stack. We will assign values in those bytes later. So far, we have something like the following, in which we have 16 bytes allocated:

Then in this line:

We are assigning FS:0x28 to the register rax. QWORD PTR, means that is a pointer to a QWORD. A QWORD simply means a variable of 8 bytes. FS:0x28 contains something called the stack canary, which is a random value used to mitigate the risk of buffer overflow attacks. If that value is overwritten, the program will detect an attack or error and terminate. Then in this line:

We are assigning the value of rax, which currently has the stack canary, to rbp-0x8. Note that rbp-0x8 is located in the memory chunk of 16 bytes we previously allocated. So, we are placing the stack canary in the first part of the stack frame of the main function. In the following image the stack canary is colored in yellow:

In assembly, we cannot assign directly the contents of a memory address into other memory address. We must read the contents of the memory address into a register and then assign that register to the other memory address. That’s why rax was used. In this line:

We are assigning 0 to the lower 32 bits of the rax register. In other words, eax are the lower 4 bytes of the rax register which is 64 bits. Then, the line:

Is used to make eax equal to zero. XOR is exclusive OR. When you XOR a variable with itself, the result is always zero. This is a property of the XOR operation.

Afterwards in this line:

We are assigning to rdi the string that contains the message "Enter a value :" in our program. The instruction ‘lea’ assigns the address in the square brackets. In contrast, mov assigns the content that is located in that address. The string "Enter a value :" is located in rip+0xfc. Note that GDB gives us an indication of what is the value of rip+0xfc, as a comment at the right that shows 0x555555554834. In the current GDB session you started, run the following command to print the string at that address:

You will see as output:

In this line:

We are setting eax to 0. Note that there are not square brackets, because of that, mov assigns the value at the right side directly, and not the content in the address 0. We need to set eax to zero because this is the number of floating-point arguments (FP args) that we will be passed to printf, which we are about to call. So, we are indicating we are not passing any floating-point numbers to printf. Note that we have already set eax to zero doing the XOR. Sometimes, compilers generate assembly that a human could optimize further. In this line, we finally call printf, with the string "Enter a value :" as the argument :

Afterwards, we are calling scanf. Remember that in C, we called scanf like this:

In assembly, the next line we are executing is this:

[rbp-0xc] is the address of a local variable, remember that rbp is the base pointer. In assembly we subtract an offset to the base pointer to access the local variable we want. In [rbp-0xc] is located the variable we declared in C as ‘int i’. In other words, [rbp-0xc] is the address of ‘I’. Then we have:

In which we assign rax to rsi. The register rsi is the source index register, which determines where the information read from the keyboard goes in scanf. Since we assign the address of ‘i’ to that register, the user input will be assigned to ‘i’.

The following line calls scanf, with the arguments that are already set:

This line:

Assigns the content at [rbp-0xc], to eax. By now, [rbp-0xc], which is the spot that stores the value of the variable ‘i’ we declared on C, already has the value that the user input. So, eax currently has the value that the user input.

The line:

compares eax to 5. The result in that comparison is placed in flags that we do not see in the source code and belong to a register called the control register. Those flags are the carry flag, sign flag, overflow flag, and zero flag. Assembly automatically uses them to represent the result of a comparison.

Then, in the following line:

The instruction jle means Jump if Less or Equal. So, if in the result of the previous comparison eax was less than or equal than 5, the execution of the program jumps to the address 0x555555554775. You may have different addresses in your assembly if you compiled it on your own, but the instructions are the same. In the assembly from the example, at address 0x555555554775, we have the following lines ( note that we kept the addresses at the left of the instructions so you can verify the address you jumped to):

Those lines will print the message "Less or equal than 5" in a similar manner we printed a message before. Then, the next lines after the call of printf, are:

In the first of those lines which is:

We make eax zero. Then we have:

That line accesses rbp-0x8, which contains the value of the stack canary. We assign that value to rdx. Then at this line:

We xor the rdx with fs:0x28. In an XOR operation, if the two elements we operate are equal, the result is zero. Then, in this line:

‘je’ means jump if equals. If the result of the XOR is zero, which would set the flags as if a comparison was equal, we jump to 0x55555555479f. What we are doing at a general level in the last lines, is taking the stack canary from our stack frame. Remember that the stack canary was previously stored there. Now we compare it with the original value of the stack canary at fs:0x28. If the value is the same, it means that the chunk of memory which was holding the stack canary in the stack frame was never overwritten. If it was never overwritten, we do a jump to skip this line:

Which calls a function that indicates that the protection was violated. Note that the ‘jmp’ instruction jumps without verifying any condition. In the last two lines of the program:

The instruction ‘leave’ restores the old value of the EBP that was stored in the stack. As we explained, the ebp from the previous function that called the current function is stored in the stack. Then, ‘ret’ pops the return address from the stack and redirects the execution of the program to that address. Note that a program can redirect its execution to other address by assigning that address to the rip (instruction pointer). The instruction ‘ret’ automatically pops an address from the stack and assigns it to the instruction pointer.

That is the end of the ‘main’ function! Stay tuned for more content on Assembly and in the meantime checkout this great online course on the topic!

One way vulnerabilities are reduced is through bug bounty programs, in which organizations offer rewards to their employees or the public for finding vulnerabilities and reporting them to be fixed.

This is beneficial to the organization because it allows them to find and fix vulnerabilities before they are exploited by malicious actors. Many companies have bug bounty programs, and many people are safer because of the security flaws that have been found and fixed through them.

Bug bounty programs are also beneficial to hackers as they can earn money legitimately while practicing their skills and helping others be more secure.

Some bug bounty programs include:

Even governments offer bounties!

When a vulnerability is found, it is assigned a CVE number, which is a unique identifier for that vulnerability. CVE stands for Common Vulnerabilities and Exposures, and it is a list of publicly known cybersecurity vulnerabilities. CVEs are assigned by the CVE Numbering Authority (CNA).

By defining and cataloging vulnerabilities, security researchers, engineers, and analysts can more easily communicate about them to each other. Imagine trying to fix a problem without knowing what to call it!

The list of CVEs, and forms to submit or update them, can be found at https://www.cve.org.

Before publishing a vulnerability from a bug bounty program, or as a CVE, you should consider the ethical implications of doing so.

If a vulnerability is published before it is fixed, it could be exploited by malicious actors. This could cause harm to people or organizations, as well as legal consequences for the publisher. Each organization or program will have its own rules and preferences for how to responsibly disclose vulnerabilities.

Additionally, never hack into a system without permission, or attempt to go further than requested. This is illegal, and it could similarly cause harm to people or organizations. Bug bounty programs will define clear scopes for what is allowed.

If the organization does not respond to a disclosure of a security risk to them or their users within a reasonable timeframe, there may be other options such as contacting a governing agency. In the United States, the Cybersecurity and Infrastructure Security Agency (CISA) is a good place to start: https://www.cisa.gov/coordinated-vulnerability-disclosure-process.

If a malicous actor is able to find and exploit an unreported vulnerability, it is known as a 'zero-day', because the organization has had zero days to fix it. These are considered the most dangerous, and can impact millions of innocent people. Ultimately, careers in cybersecurity are all about preventing these from hapening.

While this Primer cannot cover all the ethical considerations of reporting individual vulnerabilities, it is important to consider your ability to help others through responsible disclosure.

Many hacking tools are web-based, and so they’ll work on any operating system that allows you to run a web browser. A good example is CrackStation which allows anyone with an internet connection to check password hashes.

Another option is to use a remote server, which is a computer that you can access over the internet. Typically, you’d own or rent this server, so you’d have more control over how it’s used. This is a great way to run tools that require a lot of processing power, or to run tools that you don’t want to run on your own computer due to space or computing power limitations. Remote servers are often called and offered by 'cloud' services, and they’re a great way to get started with hacking!

Note that web-based tools are often hosted on their own remote servers that they use as a 'backend' to process inputs and requests from the 'frontend', or the website that you can interact with. Having a remote server, like an instance of Amazon Web Services, Google Cloud Platform, or Azure, is unique in that you can choose the tools that are installed, the capability of the server, and how accessible to the public it is.

Virtual machines (VM) are a great way to run tools that require a specific operating system, or to run multiple operating systems at once. These can be run locally, or on a remote server.

You might sometimes hear VMs referred to as a 'box' because anything inside of one tends to stay inside. You can treat a VM as if it were a separate computer - even if it’s sharing hardware locally or with your remote server!

For example, if you use a Windows computer, you can run a virtual machine with a distro of Linux to run Linux tools. You can also configure your virtual machine to be created in a certain way, and then reset or share that state with others! Podman is an excellent option for this, and helps teams have effectively identical environments so collaboration is easy. Since hacking can sometimes be very dependent on the version of a target’s hardware or software, being able to practice on an exact copy is helpful. For the same reason, this is why downloading security updates for your software is a good idea! Cyber teams around the world work to 'patch' problems and publish fixes as quickly as they can.

Additionally, if you’re investigating potential malware, it’s a good idea to run it in a virtual machine to help protect your computer. Since the VM acts like an independent computer, most malware will be contained inside it. If you run into any issues, you can simply reset the virtual machine to a previous state.

To get started, you might be interested in VirtualBox, which alows for software virtualization to whatever your other tools or use cases need.

When accessing a remote server, you may need a Virtual Private Network, or VPN, to connect to it. This is a way to securely connect, as well as protect your privacy.

In this arrangement, your data will be encrypted and sent to the VPN provider, who will then send it to a remote server, such as a website. If a third party intercepts your data, they won’t be able to read it, and if they’re listening to your traffic, all they’ll see is the connection to the VPN, rather than where you go next. Pretty handy!

In industry, companies often require their employees to use a company VPN to access their internal network from outside the office. Just like how VPNs can protect an individual’s data, they can protect a company’s sensitive information too! Without a VPN, employees working remotely may be vulnerable to their credentials being stolen.

If you choose to use a VPN, it’s important to understand that you’re trusting the VPN provider with your data. If you’re working on a sensitive project, you may want to vet the VPN provider to ensure that they’re trustworthy.

Hackers need to worry about their own security too! When using virtual services, along with a VPN, use strong passwords and multi-factor authentication whenever possible. That way, even if an adversary were to steal your password from one service, they would need others in order to impersonate you.

If you pursue cybersecurity as a career, many people may be trusting you with their data. You should take this responsibility seriously, and protect your own accounts to avoid putting others at risk.

Best practices change often, but current recommendations include using a password manager, and including a hardware token for authentication. When creating a password, consider using a passphrase instead, as these are generally easier to remember and harder to crack.

IDEs, or Integrated Development Environments, are tools that help developers write code. They often include features like syntax highlighting, code completion, and debugging.

Visual Studio Code is a popular IDE that’s available for Windows, Mac, and Linux. Due to it being open source, many developers are able to contribute plugins to extend its functionality for specific languages or use cases.

An IDE can help hackers by making it easier to write code for scripts, read code from their targets, and by providing tools to help them understand what code is doing.

If you’re interested in installing a distro of Linux on your computer or on a virtual machine, it’s generally a good idea to start with a popular distro so that there are plenty of resources and people that may be able to help you.

A popular distro for beginners is Ubuntu, and another among hackers is Kali. If you don’t want to install a distro, you can also use a live USB, which is a USB drive that you can boot from. This is a great way to try out a distro without installing it. Some, like Tails, are designed to use this feature to protect user privacy.

You’ve likely used regex before. For example, grep and find are two Unix commands that use regular expressions to search for files and text. For more about them, gate.io login.

Some other common use cases for regular expressions include searching for:

Regular expressions can also be used to validate, or check, a user’s input. For example, you may want to check that a user’s credit card number is in the correct format before allowing them to submit a form.

This can also be useful for replacing or removing a string from a document. For example, you may want to remove all instances of a certain word, or perhaps prevent an attacker from submitting a form with malicious code.

Regex can be difficult to understand at a glance, as it is meant for describing patterns, not just simple strings.

A regex pattern is a sequence of characters that define a search. The regex xyz would match the string 'xyz', but not 'xy' or 'xzy'.

This can be expanded to include more complex patterns. For example, x.. or x.*y.*z` would also match 'xyz', but also 'xab' or 'x123y456z'.

Much of our data is structured in a way that can be described by regular expressions. Email address often include the '@' symbol and a domain address, and credit card numbers often follow rules based on their issuer. Even our picoCTF flags are often in the format picoCTF{}, which could be described by regex as picoCTF\{.{1,15}\}.

Anchors can match the start (^) or end ($) of a string. This can be helpful if you aren’t sure what the rest of the string looks like, but you know part of the pattern.

We covered Python in our earlier chapters, which includes built-in support for regular expressions. By importing the re module, you can create and test regex in your code.

As an example:

This would print 'Match found!', as the pattern 'hello, *' matches the string 'hello, world!'. It would also return a match if the string included your name, like 'hello, reader!'.

Throughout this Primer, we’ll share examples from other coding languages as well. Regex is a very helpful tool, and so it is nice to be able to use it in many different environments, depending on what is available and your comfort level. You might see regex for helping with a database query, website, or even a CTF challenge!

To start using Git locally, make sure to download a copy for your operating system from their website:

https://git-scm.com/downloads

This has already been done for you in the picoCTF webshell, and can be verified by typing git --version.

Using a VCS takes some practice with the shell. If you feel a bit lost, you may want to touch up with our chapter on using one.

Once inside a shell with Git installed, you can start, or initialize a repository with git init. This will start 'tracking' all the files in your current folder.

A repository, often abbreviated as a repo, is a collection of files. Version control works by 'tracking' changes to these files, and letting you undo or merge changes whenever you want.

You can now tell Git who you are with git config --global user.email "<your email>" and git config --global user.name "<your name>".

Many video games have 'save' or 'check' points, where you can return to a point in the level if you need to. In Git, 'commits' act in a very similar way. You can add, or stage, all the files in your current folder with git add ., then commit them to be saved with git commit -m "<your description>".

Now, you can make any changes you want to the contents of your folder. You could add or delete files, or change lines of code.

When you’re ready to go back in time, you can see your past commits with git log. By default, this will show the author, commit ID, time, and description. The commit ID will be a long series of letters and numbers. This is based on a 'hash' of your files. We’ll talk more about hashing later in this Primer with the cryptography chapter. By copying the commit ID, we can time travel back to that save point with git checkout <commit ID>. Pretty cool right?

You can also create multiple 'branches' of time with the git branch <branch name> command! You can see all local and remote branches with git branch -a, and switch between them with git checkout <branch name>.

When you start a repository, you’ll be on the main branch. This may also be called the trunk or boss. If you’re working on an older repository, you may see it referred to as master. You can rename your main branch to whatever you’d like, but make sure that any collaborators know about the change.

Creating multiple branches as you work is a very powerful way to keep track of what you’re working on. Each branch can have its own commit history. This can be especially useful for multiple people working together.

It’s a good habit for each person to have their own branch, and for each new feature or problem to be worked on its own branch. When ready, a branch can be 'merged' or 'combined' with the branch you currently have checked out with the git merge <branch name> command.

Above is an example of a branching structure. Each commit is numbered with a prefix 'C', and a branch has been created to work on a feature. 'C4' is a snapshot, or check point, of the most progress on the master, or main, branch. 'C5' with commit ID "iss53" is a snapshot of the most progress done for the feature. Note how 'C5' contains 'C0', 'C1', 'C2', and 'C3' while 'C4' only contains 'C0', 'C1', and 'C2'.

When merging 'C5' into the main branch at 'C2', the commit history of 'C5' will be merged as well. If $ git log were to be run afterward, it would show a path from commit 'C4' to 'C5' to 'C3' to 'C2' to 'C1' and finally to the initial commit 'C0'.

Time travel can be tricky! But by keeping careful track of commits and their common ancestors, we can branch and merge with confidence.

If you’re working with a 'remote' repository, such as one on GitHub, you can 'pull' or 'fetch' changes from the remote repository with git pull. This will download any changes from the remote repository and merge them with your current branch. This is known as 'fast-forwarding' because the changes are simply added to the end of your branch’s commit history. It’s important to do this regularly to avoid merge conflicts later!

A merge conflict is when two branches have changes on the same line. This can happen when you’re working on your local machine or personal branch, and changes are made to the original file before you merge back in. Fetching the latest changes helps ensure that any differences are minimal. Ideally, conflicts can also be avoided by working on different files or different lines of code on each branch.

However, if you do run into a merge conflict, Git will show you the difference between the file on each branch and ask what you’d like to keep. You can then use a text editor to delete the other change, or splice the changes together.

The start of the conflict is marked with <<<<<<< HEAD, and the end of the conflict is marked with >>>>>>> <branch name>. Somewhere in the middle will be a ======= which marks the division between the lines in each branch.

It’ll be up to you to decide what to keep and what to delete. The markers from Git are just there to help you find the conflict, and can be deleted once you’re done.

For example, if you had a file with the following contents:

And were working on two separate branches, one with the following changes:

And another with the following changes:

If you try to merge the two branches together, you’d get the following error:

This can be a scary message! But if you open the file, you’ll see the following:

The first line is the original file, and the second line is the change from the dogs branch. The third line is the change from the cats branch.

To resolve this conflict, we’ll need to decide how to avoid example.txt from having two different lines in the same place. We could delete one of the lines, or combine them together. For example, we could change the file to the following:

Once you’ve chosen the changes that will continue through the merge, you can add and commit the file like normal, or use git merge --continue. You can also abort the merge with git merge --abort if you’d like to start over. One more useful tool is git stash which will save your current changes and allow you to return to them later with git stash pop.

Afterward, your original branch will be updated with the changes from the other, merged branch. Great job!

After finishing your changes and pulling and merging with the main branch, you can 'push' your changes to be used by others, or yourself on a different device. If you’re working on a cloned copy, you can use git push to send your commits to their source, the remote repository.

If you’re working with files you’ve created locally, you’ll need to create a remote repository to push to. This can be done with git remote add origin <remote repository URL>. You can then push your changes to the remote repository with git push -u origin <branch name>.

GitHub is a good tool to get comfortable with collaboration. 'Pull requests' are a way for maintainers of a project to review your work and can help catch any errors that slipped past what merge conflicts can catch. Sometimes, automated tests are run on the code as well to make sure it’s ready to go into production!

https://github.com

As a hacker, you’ll want to work closely with your team to make sure everyone is using updated code, scripts, and programs as modifications are made to solve challenges. Be careful of forcing changes with the -f flag as this can overwrite any work that’s already been completed.